PosterWall Facebook Blog - Upload any text, file, video to your blog - share on Facebook
Connect with Facebook Share
Upload any text and file to your blog, post any link to your Facebook account with the "f" "Share" button.

Go Back   PosterWall Facebook Blog - Upload any text, file, video to your blog - share on Facebook > Blogs > romeodizon19@yahoo.com.ph
Connect with Facebook

Rate this Entry

Search for Best PTO Hydraulics/Control Lever Design and Modification

Posted 04-20-2011 at 11:32 PM by romeodizon19@yahoo.com.ph

HEAVY DUTY PUMPS

LIVE PAK SYSTEM

The MLS Series M Live Pak Pump System is specifically designed for start and stop residential refuse handling.

Maximum route efficiency is accomplished without fear of excessive hydraulic flow, shutdown or heat buildup, yet the Live Pak still prevents system overspeeds without interrupting work cycles. Moreover, the Live Pak may be put to work on new equipment or can give any old equipment new life. The Live Pak works well with all existing designs.

The Live Pak is available in six different pump sizes and controlled flows up to 60 GPM.
(Sizes ranging from 22-44 GPM @ 1000 RPM).



POWR-PRO PUMP

The Powr-Pro Pump System is an on-demand live power hydraulic system ready for work with a single flip of the switch. The pump can be driven by either the engine crankshaft or flywheel PTO and contains no clutches or gears to engage or disengage, thus providing increased productivity for all solid waste packers and other mobile power applications. The Powr-Pro Pump System carries a full Two Year Warranty.

All cast iron, three piece construction
System matched components
Speeds to 3000 RPM
Pressures to 3000 PSI
7 standard sizes: 19, 23, 25, 27, 31, 35, 40 GPM*

*GPM @ 1000 RPM



POWER-MISER SYSTEM

Crankshaft or PTO Driven

Provides instant auxiliary power for Refuse Packers, Snow Removal/Ice Control Vehicles and many other mobile power applications.

EASY, DASH-MOUNTED CONTROL by Electric Switch or Manual Air Valve.

LOWER OPERATING COSTS. When the Power-Miser is operated in the Off Mode, only enough oil flow to lubricate the pump is permitted. The Off Mode requires less horsepower, increasing fuel economy. For continuous duty operation, Power-Miser offers a practical alternative to the expense of clutches and their maintenance.

The basic Power-Miser System is comprised of three elements: a Pump, a Power-Miser Valve, and a Bleed Off Valve. Each has been specially designed for Power-Miser operation.
Attached Files
File Type: pdf factoryd06.pdf (1.19 MB, 422 views)
Posted in Uncategorized
Views 1518 Comments 0 Edit Tags Email Blog Entry



« Prev     Main     Next »
Total Comments 0

Comments

 

All times are GMT +1. The time now is 02:56 PM.

Connect with Facebook